RCA DRD203 RW - Manual (Page 41)

39
Setting Up the Remote
Using the Remote Buttons to Control a Device
Once the remote has been programmed with the correct codes, you are
ready to use it to control your devices.
To operate the device:
1. Press the device button (TV, DSS, VCR, or ALT) to set the
remote to control the device.
2. Press OFF/ON to turn the device off or on.
Note: For PROSCAN, RCA,and GE devices, pressing the device button will
usually turn the device on; use the POWER button to turn the device off.
3. Use the remote buttons that apply to that device.