Rosewill HDD RAID RSV-S4-X - Manual (Page 6)

4 Bay SATA to eSATA 3.5” HDD RAID Storage System RSV-S4-X User Manual
6
1 WELCOME
RSV-S4-X enhances your data storage by combining advanced RAID 1 features typically seen
on high-end data systems with low cost/high capacity Serial ATA drives. By using industry
standard SATA drives and Silicon Image Host Bus Adapters, you can achieve extraordinarily
low costs while remaining assured that your data is protected against hardware failure.
1.1 PRECAUTION
Please read the safe precautions carefully before you using RSV-S4-X storage appliance.
Ensure that you use the product correctly according to the procedure described in this guide.
The following safety precautions are intended to remind you to operate the product safely and
correctly. Please read and ensure that you understand them before you proceed to the other
sections of this guide.
z Do not attempt to disassemble or alter any part of the product that is not describe in this
guide.
z Do not allow the product to come into contact with water or other liquids. In the event
that water or other liquids enter the interior, immediately unplug the product from the
computer. Continued use of the product may result in fire or electrical shock. Please
consult your product distributor or the closest support center.
z Do not handle the product near a heat source or expose them to direct flame or heat.
z Never place the product in close to equipment generating storage electromagnetic fields.
Exposure to strong magnetic fields may cause malfunctions or corrupt data.
z Can’t operate properly under Windows 3.x/ 95 / 98SE/ ME/ NT.
z Hard disk drive is not including.
1
Redundant Array of Independent Devices, a method of combining drives to provide better protection and/or performance.