Tv/vcr back panel, 8chapter 1, Audio and video input jacks – RCA T25208 User Manual
Page 10: Uhf/vhf jack, Audio and video output jacks
8
Chapter 1
Connections & Setup
Jacks on the Back of Your TV/VCR
If you are connecting many components, please consult the manual that came with each
component for connection instructions. The picture of your TV/VCR’s back panel describes the
jacks on the back of your TV/VCR and what types of components that you can connect to these
jacks.
When connecting, make sure you connect Output jacks to Input jacks, Video to Video, etc.
TV/VCR back panel
OUT
1
VIDEO
AUDIO
LINE
UHF/
VHF
Audio and Video Input Jacks:
Connect any of the following components:
• DVD Player
• Satellite Receiver
• Laserdisc Player
• Internet Access Device
To watch the content from the component that’s
connected to the VIDEO Input Jack, press the
INPUT button on the remote until LINE 1
appears on-screen.
UHF/VHF Jack
Connect a coaxial cable that
carries the signal from the
antenna, cable, or cable box
to the UHF/VHF jack.
Audio and Video
Output Jacks:
Connect an audio and video
cable to these jacks to output
the sound and video to
another component.