Radio Shack 16-3314 - Manual (Page 12)

O
ther
Connect
ions
12
C
ONNECTING TO
AC P
OWER
You can power the Travel Theater using the supplied 12V,
2.5A AC adapter.
1. Turn the “feet” on the bottom of the Travel Theater
counterclockwise to remove them
2. Remove the Travel Theater from the carrying case, and
position the stand so it supports the Travel Theater on a
flat surface.
3. Connect the supplied AC adapter’s barrel plug to the
Travel Theater’s DC 12V jack.
4. Insert the AC plug to a standard AC outlet.
Cautions:
You must use a Class 2 or ITE power source
that supplies 12V DC and delivers at least
2.5A. Its center tip must be set to positive and
its plug must fit the Travel Theater's DC 12V jack. Using
an adapter that does not meet these specifications
could damage the Travel Theater or the adapter.
!