Radio Shack PRO-29 - Manual (Page 15)

15
Number Keys — each key has a single-digit label, and keys 1-6 have
a range of numbers printed above them. The single digits refer to the
number of a channel or frequency entered. The number range (21-30,
for example) show the channels that make up a memory bank. In addi-
tion, the keypad has different functions in manual mode, scan mode,
and program mode. See “Banks and Memories.”
A LOOK AT THE DISPLAY
The display has several indicators that show the scanner’s current op-
erating mode. A quick look at the display will help you understand how
to operate your scanner.
MON — appears when you listen to a monitor memory. A number ( 1-6 )
appears to the right of MON indicating which monitor memory you are lis-
tening to.
BANK — shows which channel-storage banks are turned on for the scan
mode. See “Banks and Memories.”
KEYLOCK — appears when you lock the keypad.
BATT.Lo — appears when the batteries are low.
CH — digits that precede this indicator show which of the 60 channels
the scanner is tuned to.
P — appears when you listen to the priority channel.
MHz — digits that precede this indicator show which frequency the
scanner is tuned to.
SCAN — appears when you scan channels.
MON KEYLOCK
BATT.Lo BANK
MHz C H
20-509.fm Page 15 Wednesday, August 4, 1999 1:58 PM