RCA F19431 - Manual (Page 37)

Using the TV’s Menu System
Chapter 3 35
Channel Menu
Signal Type Displays a choice list that lets you select the current antenna type.
UHF/VHF Antenna Choose this if you are currently using an off-air antenna for TV signals.
Cable TV Choose this if you are currently using cable or a cable box for TV signals.
Auto Channel Search Tells the TV to search automatically for all the channels available
through the antenna input. When the TV finds an active channel, it places it in the Normal
channel list; inactive channels (weak stations or channels with no signal at all) will be removed
from the channel list.
List and Labels Displays a control panel that lets you edit your Normal channel list and
choose a six-character label for each channel. Follow the on-screen directions to enter your
channels and other information.
Channel # Use the CHAN up and down buttons to scroll up and down through the
channels available via your antenna. You can enter the channel number directly using the
number buttons.
Normal List Only the channels included in the Normal list are available when you scan
up and down using channel up and down. Use the CHAN up and down buttons to
indicate whether the channel number indicated is included (Yes) or is not included (No) in
the Normal channel list.
Channel Label Use the CHAN up and down buttons to enter a six-character label for
each channel. Hold the button down to scroll quickly through the characters. The TV can
store up to 27 labels in memory.
TV MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 Setup
0 Exit
CHANNEL
1 Signal Type
2 Auto Channel Search
3 List and Labels
0 Exit
Tip
To enter a number greater than 99,
press and hold “1” to enter the
hundreds digit, then press the two
remaining numbers.