Recoton/Advent EC Series - Manual (Page 14)

EN-10 EC Series
5 SCALE SETTINGS
; Long-press TARE to enter into the user-selectable scale settings (Setup mode).
; In Setup mode:
o Press Sample to step through available settings
o Press Tare to accept the displayed setting and proceed to the next Setup
parameter
; Press C at any time to exit from the Setup mode.
; Re-start the scale after changing settings in the Setup mode
The following parameters are available:
Sets the period of inactivity before
the scale automatically turns off.
The following settings are available:
0 = Off, 2, 5, 8 (minutes)
5.1 Auto-Off
Weight g
0. .
Auto-Off
Piece Weight g/pc
A.Off
Count pcs
------ .
Internal Count
(disregard)
Default Setting
Sets the range in which the zero
reading is maintained.
The following settings are available:
0 = Off, 1 = 0.5d, 2 = 1d, 3 = 2d,
4 = 3d
(d = scale division)
5.2 Zero Tracking Range
Weight g
2. .
Zero Tracking
Range
Piece Weight g/pc
trAC
Count pcs
------ .
Internal Count
(disregard)
Default Setting
Sets the range in which the Zero
indication turns on.
The following settings are available:
0 = Off, 1 = 0.5d, 2 = 1d, 3 = 2d,
4 = 3d
(d = scale division)
5.3 Zero Display Range
Weight g
3. .
Zero Display Range
Piece Weight g/pc
2Ero
Count pcs
------ .
Internal Count
(disregard)
Default Setting
Sets the level in which the Stable
indication turns on; the higher the
setting, the faster stabilization time.
The following settings are available:
0, 1, 2, 3, 4, 5 (level)
5.4 Filtering
Weight g
1. .
Filtering Level
Piece Weight g/pc
Filt
Count pcs
------ .
Internal Count
(disregard)
Default Setting
3 EC-textEN.pmd 8/9/2005, 1:41 PM 10