Renesas M16C FAMILY - Manual (Page 61)

5 Using the KD
5.1.10 If a Communication Error Occurs
If a communication error occurs, the error screen shown in Figure 5-11 appears. In that
case, click the “OK” button and check the following two points. When you finished
checking, restart the KD.
Check1: Is the power source supply selector on the USB Monitor Board set to USB
side?
Check2: Are the USB Cable and Flat Cable are firmly inserted into position?
Figure 5-11 Communication Error screen
5.1.11 Error Except a Communication Error Occurs
If an error except a communication error occurs, refer to the KD online help.
5.1.12 Operation Method
When operating except specifying above, refer to the KD online help.
58