Dip switches – Ricoh IS450 User Manual
Page 57
43
DIP Switches
DIP Switches
Only the settings of DIP switches 1 through 3 can be changed. Do not change the settings of the
other switches.
Important
❒ If multiple scanners with the SCAM function enabled are connected on the same daisy
chain, the host will not be able to recognize the IDs. In this case, set DIP switch 1 to
“ON”(SCAM function disabled), and set the SCSI ID with the rotary switch.
❒ If the daisy chain is too long, or if a nonstandard SCSI cable is used, misoperation may
occur during synchronous transfer. In this case, set DIP switch 2 to “ON” (SCSI
synchronous transfer disabled).
❒ If this scanner is connected in the middle of a daisy chain, set DIP switch 3 to “ON”
(internal SCSI terminator off).
Leave these set to “OFF;” do not
change.
OFF: Internal SCSI terminator on
ON:
Internal SCSI terminator off
OFF: SCSI synchronous transfer
enabled
ON:
SCSI synchronous transfer
disabled
OFF: SCAM function enabled
ON:
SCAM function disabled