Radio Shack PLRDVD7 - Manual (Page 9)

REPLACING THE CAR DOME LAMP
Follow the directions shown below for a new lamp changing.
1. Press the open button to eject the screen display and turn it upward.
2. Position light switch to “OFF”.
3. Push back the lamp cover and open it. (Refer to the following figure)
4. Remove and discard the old lamp.
5. Install a new bulb.
6. Close the cover.
Bulb Specification
Diameter:
ø8mm
Length: 28mm
Voltage Spec.: DC12V, 5W
CAR DOME LAMP WIRING
Color Connection
Red Power Supply
White Interior Light System
Black Ground
Note:
Lamp Cover
Bulb
Light Switch
9
Line for Car Dome Lamp