Rosewill RX81US-HT-25A-BLK - Manual (Page 2)

External Enclosure for 2.5” SATA to USB + eSATA
User Manual
Please read this installation carefully before you use the
products.
Precaution:
1. If it is a new HDD, needs to processing the disk partition
2. Win98SE and WinME do not recognize NTFS formatted drives,
so if you want to use your drive on those platforms, we
recommend you to use FAT32 instead.
3. Mac OS does not recognize NTFS formatted drives, to use
your device on both platforms, we recommend you using
FAT32.
4. If you use Win2000 / WinXP / Win Vista and FAT32, the
biggest single partition you can create will be 32GB. To create
larger partitions, you need to change to NTFS format.
5. Make sure the jumper settings of your hard drive is “master”.
System Requirement
•
Minimum Intel Processor II 350MHz, 64MB RAM
•
Compatible with IBM PC, USB interface included ，Windows
98/ME/2000/XP/Vista operate system.
•
Minimum Apple G3 processor, 64MB RAM
•
MAC computer system MAC OS V8.6 or higher.
•
Linux OS: please download kernel USB stack.
Package Contents
•
2.5 inch external enclosure
•
Driver Disk
•
Installation Guide
•
eSATA cable
•
USB cable
•
USB to DC cable
•
Screw Kit
•
Carry bag
1