Rosewill RC-701 - Manual (Page 3)

Hardware Installation
It is recommended that you remove any previously installed sound card and drivers
prior to installing this 5.1 Channel PCI Sound Card to avoid any conflicts. If
previously installed drivers are not removed, this 5.1 Channel PCI Sound Card
perhaps not function properly. (Note: If your computer has on-board sound you will
need to disable it on the motherboard. For more information please see your
computer’s documentation or contact your computer’s manufacturer.)
Driver Installation
For Windows® 2000, XP/2003/Vista/7/8 (32/64 bit)
Place the Driver CD into the CD-ROM drive. Click the Start button on the taskbar
and click Run. Type
“"D:\RC-701\Setup.exe".. (Assuming you have placed
the CD in CD-ROM drive labeled as D).
1. Follow any on-screen instructions to complete the software installation.
2. Restart your system.
3. Once you have rebooted the computer, this 5.1 Channel PCI Sound card is
ready to be used.