Roland V-ACCORDION FR-7 - Manual (Page 97)

Restoring the factory defaults
V-Accordion r
97
Restoring the factory defaults
You can reset the FR-7b/FR-5b to its factory settings, which means that your own Sets and Global settings are replaced
by the settings the FR-7b/FR-5b contained when you first got it. You may wish to archive your settings before initializing
the FR-7b/FR-5b (see p. 92).
(1) Switch on the FR-7b/FR-5b while holding down
the [MENU÷WRITE] button.
The display changes to:
(2) Press the [DATA÷ENTER] knob to initialize the
FR-7b/FR-5b (“YES” is selected by default).
If you decide against initializing the FR-7b/FR-5b,
rotate the [DATA÷ENTER] knob to select “NO”, then
press it.
If you selected “YES” and pressed the [DATA÷ENTER]
knob, the display now briefly confirms that your
V-Accordion has been initialized:
The FR-7b/FR-5b now sounds and behaves like when
you first bought it.