Rosewill RNX-N1/N1MAC - Manual (Page 7)

Wireless Adapter RNX-N1/N1MAC User Manual
7
• Carefully insert the USB adapter into the USB port. Windows will then detect and install the
new hardware.
• An R icon will then appear in the system tray. Right click on the R icon and then click on
Launch Config Utilities.
Note: Click on Use Zero Configuration as Configuration Utility if you would like to use
Windows Zero Config.
2.3 PROFILES
The Profile tab is used to store the settings of multiple Access Points such as home, office, café,
etc. When adding a profile you are required to enter a profile name and SSID as well as configure
the power-saving mode, network type, RTS/fragmentation threshold and