Connecting external devices – Roland AR-200 User Manual

Page 30

Advertising
background image

30

Controlling the AR-200 from an External Device (Control Input Connectors)

Playing Back Phrases
Assigned to the Connectors

(Direct Playback)

What Is Direct Playback (Reverse Priority)?/Use and
Applications

By inputting control signals directly to Port Nos. 1 through 9,
you can play back the phrases assigned to those numbers. Up
to 9 phrases can be played back. Assign phrases 1 through 9
beforehand to Port Nos. 1 through 9.

This is very convenient when you want to specify a desired
phrase directly using a switch, relay, sensor, or other such
means.

fig.inp-08

Connecting External Devices

Connectors Used for Direct Play (Last-In)
(Control I/O Connector)

1 through 9: Inputting a control signal directly to the
connector with the number corresponding to the phrase
starts playback of the phrase.

“10 (STOP) “: Stop phrase playback.

In addition to the connectors just described, shorting the
“11/12 (GND)” (ground) connectors enables “On.”

fig.inp-09

"Important Notes on Making Connections and Switching

the Power On and Off"

(p. 9)

Operational Specifications for
Direct Playback (Last-In)

Basic Operation of Direct Playback (Reverse
Priority)

fig.inp-10

Playback:

Input control signals to Port Nos. 1 through 9.

→

This plays the phrase assigned to the connector.

stopping:

Input control signals to Port No. 10 (STOP).

→

This stops playback of the phrase.

"Operational Specifications for Control Input Playback"

(p. 28)

Priority Order

The most recently input control signal is given priority in
playback.

If a new and different control signal is input during playback
of a phrase, playback of the current phrase is stopped, and
playback of the specified phrase then begins.

fig.inp-11

Playback is repeated while the control signal is continuously
input.

fig.inp-12

Port No.
Phrase

1

0001

2

0002

3

0003

0004

4

0005

5

9

0009

A Control

Signal

A Control

Signal

A Control

Signal

A Control

Signal

A Control

Signal

A Control

Signal

10

1

Select a Phrase

9

STOP

12 11

GND

0002

AUDIO OUTPUT

Port No. 1

Port No. 2

STOP Port

0001

0001 Interrupted

0001

0002

0001 Interrupt

AUDIO OUTPUT

Port No. 1

Port NO.2

AUDIO OUTPUT

Port No.1

0001

0001

0001

AR-200_e.book 30 ページ 2003年7月14日 月曜日 午後1時11分

Advertising