Radio Shack ET-3507 - Manual (Page 11)

11 Operation
ˆ
Operation
A QUICK LOOK AT YOUR PHONE
REDIAL — To quickly redial the last number dialed, pick up the corded
handset or press
SPEAKER , then press REDIAL .
To redial a busy number, press REDIAL without hanging up the phone.
<B7I> <B7I> <B7I> <B7I>
appears and a dial tone sounds for about 2 seconds, then
the number automatically redials.
Notes:
The redial memory holds up to 32 digits, so you can redial long-distance as
well as local numbers.
The redial memory can also store tone entries and pause entries
(see “Using Tone Services on a Pulse Line” on Page 12 and “Entering a
Pause” on Page 14).
FLASH — provides the electronic equivalent of a switchhook
signal for special phone services such as Call Waiting.
If you have Call Waiting, press
FLASH to answer an incoming call
without disconnecting the current call.
<B7I> <B7I> <B7I> <B7I>
appears. Press
FLASH again to return to the first call.
<B7I> <B7I> <B7I> <B7I>
appears.
Note: If you do not have any special phone services, pressing
FLASH might disconnect your current call.
MUTE — To talk to someone else in the room
without the person on the other end of the phone
line hearing your conversation, press
MUTE on
the corded phone.
CKJ; CKJ; CKJ; CKJ;
appears. Press MUTE
again to resume your phone conversation.
REDIAL — To quickly redial the last number dialed, press TALK then REDIAL/CALL
BACK .
To redial a busy number, press REDIAL/CALL BACK without hanging up the phone.
<B7I> <B7I> <B7I> <B7I>
appears and a dial tone sounds for about 2 seconds, then the
number automatically redials.
Notes:
The redial memory holds up to 32 digits, so you can redial long-distance as well as local
numbers.
The redial memory can also store tone entries and pause entries
(see “Using Tone Services on a Pulse Line” on Page 12 and “Entering a Pause” on
Page 14).
FLASH/DELETE —
provides the electronic
equivalent of a
switchhook signal for
special phone services
such as Call Waiting.
If you have Call Waiting,
press
FLASH/DELETE
to answer an incoming
call without
disconnecting the current
call.
<B7I> <B7I> <B7I> <B7I>
appears.
Press FLASH/DELETE
again to return to the first
call.
<B7I> <B7I> <B7I> <B7I>
appears.
Note: If you do not have
any special phone
services, pressing
FLASH/DELETE might
disconnect your current
call.
CH — If you hear interference during a call,
repeatedly press
CH on the
cordless handset to change the
channel until you hear a clear one.