Radio Shack PRO-89 - Manual (Page 39)

39
4. Enter the frequency (including the decimal point) you want
to associate with the displayed car number by using the
number keys and
DELAY/ •
.
5. Press ENT to store the frequency. The frequency is associ-
ated with the car number you entered.
ADDING A CAR NUMBER TO THE
CHANNEL
You can assign the car number after you program the frequen-
cy into the channel.
1. If a car number appears on the display, press CAR twice. A
channel number appears.
2. Select the channel you want to use to store the car number
by using the number keys and MAN .
3. Press CAR twice. CAR# appears.
4. While holding down PGM , press CAR . --- flashes.
5. Enter the car number by using the number keys.
6. Press ENT to store the new car number.
CHANGING THE STORED CAR NUMBER
1. Press CAR then use the number keys to enter the car num-
ber. If necessary, repeatedly press ▲ or ▼ to select the fre-
quency.
2. Hold down PGM then hold down CAR . The car number
flashes.
3. Enter the car number by using the number keys, then
press ENT to store the car number.
VIEWING FREQUENCIES ASSOCIATED
WITH A CAR NUMBER
1. Press MAN then CAR . CAR# and CAr No. appear and _
_ _ flashes.
2. Enter the car number. If the number is one or two digits,
enter the number then press CAR . If the number is three
digits, enter the number only. One of the car number’s fre-
quencies appears.