RayTek ThermoView Ti30 - Manual (Page 21)

Laser Aperture
Optical Channel
Figure 12. Laser Aperture and Optical Channel
Note: The laser is only a sighting aid. It is not required to take measurements. The laser is
not coaxial with the infrared channel, thus the laser dot is offset from the center of
the thermal image. The laser dot is not visible in the thermal image.
Important:
Avoid directing the laser to people’s eyes. See important safety information
on the warning laser label located on the side of the unit. There are different
laser warning labels for different geographic regions. These are identified
below.
North America Europe / Latin America
Japanese Chinese
Figure 13. Laser Warning Labels For Different Geographic Regions
July 1, 2003 - 21 - Version 1.0
i i
Tel: (01943) 602001- WWW.ISSLTD.CO.UK - Fax: (01943) 816796