Channel mono operation – 22 – Rockford Fosgate 400x4 User Manual
Page 26
Advertising

2-Channel Mono Operation
– 22 –
Front
Gain
Rear
Gain
0/180
4/2
INPUT
REM B+
GND
LED
Rear
Front
Pass-Thru
Front
Rear
4 ohm min.
4 ohm min.
+
–
+
–
– L +
+ L –
+ R –
– R +
• RCAs are connected to front inputs
• Signal Input Switch set to 2-channel input
• Phase Switch set to 0
°
• Gain for front left and right channels set equally to balance
the subwoofer
• Gain for rear left and right channels set equally to balance
the subwoofer
• Impedance for front bridged channel should be no less than 4
Ω
• Impedance for rear bridged channel should be no less than 4
Ω
• Front XCard can be set to 12dB High-Pass, 12dB Low-Pass or
Full Range
• Rear XCard can be set to 12dB High-Pass, 12dB Low-Pass or
Full Range
Advertising