Radio Shack 15-1974 - Manual

© 2003 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
OWNER’S MANUAL —
Please read before using this equipment.
www.radioshack.com SM
This wireless transmitter and receiver system
use the latest 5.8 GHz technology that travels
through walls, floors, ceilings and other
obstacles, delivering high quality sound for
your home theater system’s rear surround
speakers. Using this wireless system, you will
experience movie theater quality sound in
your own home using your current home
theater surround system. We have designed
this system for use with your surround sound
home theater system to enhance the quality
of the sound and balance coming from your
speakers. You can now eliminate running
long speaker wires through your rooms, while
enhancing the sound coming from those
speakers.
How It Works
The transmitter converts the audio signal
from your audio source into a 5.8GHz radio
frequency and transmits it to the receiver.
The receiver will pick up the best signal from
one of its two antennas and convert the
signal back to its original form. Using a
powerful amplifier, the signal is passed to
your connected rear surround speakers. The
result is an enhanced sound quality resulting
in a theater quality surround sound
experience.
This system is compatible with most audio
sources such as televisions, VCRs, stereo
receivers/amplifiers, CD players, and
personal stereos. This unit allows you to
listen to wired speakers in any room in the
house when a two-channel source is
connected to the transmitter. The audio link
system also tracks the volume setting of your
audio source, so that when you increase or
decrease the volume on the audio source,
the link’s connected speakers respond
accordingly.
Some of this system’s other features include:
• 6 user-adjustable channels
• 2 diversity receiver antennas for optimal
audio reception.
• Adjustable speaker and line level input
control
• 256 option personal ID Code
• Ideal for Dolby 5.1 Digital, Pro Logic II,
DTS, SCAD and DVD Audio Systems
• Provides digital transmission for superb
audio clarity
• Immune to interference from microwave
ovens and other popular 2.4GHz
equipment
• Signal range of 30 feet
RECEIVER
TRANSMITTER
STANDBY / ON/OFF — Press to toggle
between standby mode and power on.
LED — Lights red when the transmitter is
in power on mode, and turns green when
in standby mode.
POWER/PUSH OFF —
Press to power the receiver
on or off.
Power LED — Lights
red when the
receiver is powered
on.
Signal LED — This green LED flashes when
the receiver is searching for a signal from the
transmitter. It glows steadier and brighter as
the signal strength increases.
VOLUME — Turn to
adjust sound level of the
connected surround
speakers. You may
need to adjust your A/V
receiver’s volume for
balance.
PACKAGE CONTENTS
• Transmitter
• Speaker wire (for transmitter only)
• Receiver
• AC adapter
• Adjustable stand
• Owner’s Manual
• Warranty
The lightning symbol is intended to alert you to the
presence of uninsulated dangerous voltage within this
product’s enclosure that might be of sufficient
magnitude to constitute a risk of electric shock. Do not
open the product’s case.
The exclamation symbol is intended to inform you that
important operating and maintenance instructions are
included in the literature accompanying this product.
WARNING: To reduce the risk of fire or shock hazard,
do not expose this product to rain or moisture.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
!
! IMPORTANT !
If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for
pertinent information.
o
— Warning
!
— Important
Ô
— Note
Wireless 5.8 GHz Digital Audio Link
15-1974