RCA CC6392 - Manual (Page 23)

21
Date and Time Display
5. Rotate the menu PUSH dial to
highlight the date/time display you
want to record
• AUTO DATE: The date is auto-
matically recorded for approxi-
mately five seconds and then AUTO
DATE is displayed whenever:
• The date is set or changed.
• This display mode is selected.
• The tape is changed or the tape
compartment opened.
• This display is selected when-
ever the POWER switch is set to
CAMERA AUTO.
• DATE Display: The date is
displayed and recorded.
• TIME: The time is displayed and
recorded.
• DATE and TIME Display: The
date and time are displayed
and recorded.
• OFF: No display is displayed or
recorded.
6. Press the menu PUSH dial in to select
the date/time display you want to
record.
7. Press the menu PUSH dial in to
remove the menu.
8. Press the thumb trigger to begin
recording.
Record AUTO DATE, Date, Time, and Title Displays
(continued)
LCD Monitor or Viewfinder Displays
Select the Display on the DATE/TIME DISP. Menu
TIME Display
AUTO DATE Display
DATE&TIME Display
DATE Display
AUTO DATE NOV 18.99
AM 10:25:00
OFF: No Display
NOV 18.99 AM 10:25:00