3 dhd controller rear panel, Figure 2-4 . dhd controller rear panel, Outputs – Runco PLASMAWALL XP-65DHDXA User Manual
Page 18: Inputs, Dhd controller rear panel, 4. dhd controller rear panel, Pre l iminar y
8
PlasmaWall XP-65DHD Owner’s Operating Manual
PRE
L
IMINAR
Y
8.
DOWN BUTTON
Used to direct select aspect ratios or move the menu cursor down in the OSD. When
no menu is present on-screen, this button toggles through the different aspect ratios,
in this order:
Cinema - VirtualWide - Letterbox - 4:3 - 16:9
9.
RIGHT BUTTON
Used to direct select inputs or move the menu cursor right in the OSD. When no
menu is present on-screen, the RIGHT button toggles through the different sources,
in this order:
Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB 2 -
HDMI 1 - HDMI 2
10. MENU BUTTON
Press this button to access the OSD controls, or to exit the current menu and return
to the previous one.
2.3
DHD Controller Rear
Panel
Figure 2-4 shows the rear connector panel on the DHD Controller.
Figure 2-4. DHD Controller Rear Panel
Outputs
1.
HDMI OUT
Connect this to the SLOT 2 (DVI-D) input on the PlasmaWall (see Figure 2-2).
Inputs
2.
HDMI 1 / HDMI 2 (Digital)
Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner
with a DVI or HDMI output.
3.
HD1 / HD2 (5 x Analog BNCs)
Two inputs (five BNCs per input) for connecting either RGB or component
high-definition television signals. The DHD Controller automatically detects the signal
format: RGB(HV) or YPrPb, 480p, 720p, 480i, 576i or 1080i.
The “direct select” function of the UP, DOWN, LEFT and RIGHT
buttons is available only on the analog inputs (HD/RGB, SD
Component, Composite and S-Video).
Note
Pb
Pr
Y
Video
3
IR
RS-232 Control
S-Video 1
S-Video 2
HD1
HD2
1
2
R/Pr
G/Y
B/Pb
R/Pr
G/Y
B/Pb
H
V
HDMI 1
HDMI 2
HDMI Out
H
V
TRIGGERS
RS-232 Out
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
100-230VAC 50-60 Hz, 165 Watts Max
INPUTS
SYSTEM CONTROL INTERFACE
Component Video
Serial No
Video Processor / Controller
Model
Made In USA
1
2
4
5
10
11
12
13
8
6
7
9
3
➤
➤