RCA Hollywood DV-Bridge - Manual (Page 44)

Hollywood DV-Bridge User’s Guide • Using Hollywood DV-Bridge Without a Computer • Page 44
3. Connect an RCA audio cable (red and white) from the Audio Out connector(s) on the
analog device (camcorder, VCR, or TV) to the Audio In connectors on the front of the
Hollywood DV-Bridge.
Note: Your audio cable may have separate connectors for left and right, or the connec-
tors might be joined as shown in the illustration below. Remember that you need to
use a Y-adapter if the analog camcorder or VCR only supports mono output.
Connecting DV Output
Connect a 1394/FireWire/i.LINK cable from the 1394 connector on the front of the Holly-
wood DV-Bridge to the DV connector on the DV camcorder or VCR.
Hollywood DV-Bridge
Analog VCR, Camcorder, or TV
TV
VHS
Audio Out Audio In
RCA Video Out RCA Video In
S-Video Out S-Video In
Front
Or
Hollywood DV-Bridge
TV
VHS
Front
Or
DV VCR or DV Camcorder
VHS
DV In DV Out
Analog Device (Input)