Red Rose Music MK II - Manual (Page 5)

Fig. 2 Fig. 3 Fig. 4
Installing the Speakers
Each speaker has a clear plastic sheet over
the ribbon enclosure to protect the ribbon
during shipping. When you are ready to
install the speakers, follow these steps to
remove the cover: Note that the grille is
magnetically attached.
1. Pull the cloth grille cover away from the
speaker cabinet at each corner.
2. Remove the plastic cover that is in front
of the ribbon. Save the plastic tape cover
along with the shipping carton for use
when you have to pack the speakers for
shipment.
3. Carefully guide each pin from of the
grille and align into the receiving sockets
located in the speaker cabinet.
5
Please be advised that the magnets used in the rib-
bon tweeters are very strong so keep all metal ob-
jects at least 6 inches away from the front of the
speaker.