RadioLAN DockLINK - Manual (Page 40)

890-010 12/04/98 Page 32 © 1998 RadioLAN.
Setting up10BaseT Port Parameters
The 10B ASE T P ORT P ARAMETERS page displays the
10BaseT Network Interface Card port’s name, allows you to
enable or disable the port and network filters, and allows
you to examine the MAC Address filter. It is necessary for
an entry in the Port Name field, but you need not change
other entries on this page.
Entries on this page other than the Port Name field can
disable communication with the Network Interface
Card: RadioLAN Recommends that you avoid making
changes to items on this page.
Although unnecessary, if you have a particularly special
application, you can edit other items on the screen. Filters
that you can enable or disable are as follows:
•
MAC Address Filter
•
Block IP Packets
•
Block IPX Packets
•
Block NetBEUI Packets
•
Block NetBIOS Packets
Figure 19: 10BaseT Port Parameters Page