Rosewill PCIe LAN Card RC-401-Dual-EX User Manual
Page 7
10/100/1000Mpbs PCIe LAN Card
RC-401-Dual-EX User Manual
Click “Marvell Network Control”
Various tabs contain trees showing the currently installed adapters and their configuration:
z
The “Adapter” table displays the network adapters available in your system with their
corresponding ports. It shows the ports, which have been configured as VLANs, for RLMT and
those, which have been aggregated into a team.
This tab only serves as an overview. For configuration, select one of the other tabs.
z
The “Virtual LAN” tab lists all configured virtual LANs along with the corresponding ports and
the ports, which may be bound by VLANs.
In this tab, the user can add, remove, and configure VLANs and set VLAN specific parameters.
z
The “Team” tab shows all links or ports, which may be aggregated in a team or have already
been aggregated to form a team.
In this tab, the user can add, remove, rename, and configure teams.
z
The “RLMT” tab offers the possibility to configure dual port adapters for Redundant Link
Management Technology (RLMT). RLMT monitors the status of both ports. IF the link of the
active port fails, RLMT automatically switches to standby link and the connection is maintained.
In this tab, the user can add and remove RLMT to/from the ports and set RLMT specific
parameters.
z
The “Protocol” tab shows all entities (Port, VLAN, RLMT, Team) and the protocols, which have
been bound to these entities.
z
The “Power Management” tab shows the current power management settings of all installed
adapters.
z
The “Statistics” tab lists statistic values, e.g. Transmit Packet OK (XMIT OK).
z
The “Sensors” tab shows the values of voltage and temperature sensors (if applicable)
z
The “Specifications” tab lists fixed values during operating time, such as Hardware Revision,
Software version, Max. Frame Size, etc.
z
The “Support” tab provides information on how to reach the Marvell Technical Support.
For more information on the
“Marvell CPA utility”
, refer to the online help available for this program
(click the HELP button when the program is running).
6