Ricoh MP1350 - Manual (Page 11)

Copyright © 2006 MCA Internet, LLC dba BERTL. 13 November 2006
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document. Page 11
Ricoh Aficio MP1350
Toner Replacement Process
Dual toner supplies are accessed from a small panel to the
side of the main engine access doors. The access door to
the toner refilling points can be opened without disrupting
the printing process.
The dual toner supply allows for long uninterrupted printing
and allows for refilling on the fly during a print run.
Users simply press in the green tab to release the toner
bottle, then turn the bottle to remove it from the unit. The
toner exit door is positioned at the top of the bottle upon
removal, thus avoiding chances of spillage that could result
from any latent toner left in the bottle.
The new bottle is first shaken, protective packaging
removed, then inserted into the vacant toner bottle location
and twisted until locked in place.
BERTL analysts found the process to be mess-free.
Routine Maintenance