RocketFish RF-CARMNT2 - Manual

Setting up the car mount
1 Open the stand locks.
2 Lift the headrest on the front seat.
3 Rotate the brackets to an angle that will allow the brackets fit through
the headrest posts.
RF-CARMNT2 I iPad 2 Car Mount
Quick Setup Guide
General description
Congratulations on your purchase of the iPad 2 car mount. The iPad car
mount securely holds your iPad 2 for use or display.
Package contents
4 Slide the brackets through the headrest posts.
5 Close the stand’s locks.
6 Close the stand locks.
7 Put your iPad 2 into the sleeve by placing
the bottom of your iPad 2 into the
bottom of the sleeve, then
pressing the top of your iPad 2
into the sleeve.
Sleeve Stand with base pre-installed
acket o a a a e bra s fi h h