RCA 15956220 - Manual (Page 9)

Chapter 1 7
Connections & Setup
Set the Menu Language
The first part of the SETUP asks you to select your preferred language for the
menu system.
1. Highlight your preferred language for the menu system.
2. Press MENU to select that language.
Complete Auto Channel Search
The next part of the SETUP asks you if you want the TV to search for all
channels viewable through your antenna or cable TV system. This is sometimes
called “auto programming.”
1. Press MENU to tell the TV to begin searching for channels. A progress
report appears on the screen.
2. When the screen on the TV tells you the search is complete, press MENU.
Note: If you skip Auto Channel Search now, you can access it later
SETUP
Select the language to be used
in these menus.
1 English
2 Español
3 Français
SETUP
Would you like the TV to search
for all available channels?
1 Search for channels
2 Skip this step
The Front of Your TV
Front Panel
If you cannot locate your remote you can use the buttons of your TV to operate many of the
TV’s features.
MENU Brings up the Main menu. When in the menu system, it selects highlighted items. Also
returns you to the previous menu.
CH Scans down through the current channel list. When you’re using the TV’s menu system,
used as a down arrow.
CH ^ Scans up through the channel list. When you’re using the TV’s menu system, used as an
up arrow.
VOL – Decreases the volume. When you’re using the TV’s menu system, used as a left arrow.
VOL + Increases the volume. When you’re using the TV’s menu system, used as a right arrow.
POWER Turns the TV on and off.
Front Panel Jacks
You can access the component you connected to the front of the TV by pressing
the INPUT button on your remote.
VIDEO (in) Receives video from another component such as a VCR,
camcorder or video game console.
L/MONO and R (audio) Receives audio from another component such as a
VCR, camcorder or video game console.
L/MONO R VIDEO
^
F27441.01 Setup 5/23/02, 9:28 PM 7