Radio Shack CID-927 - Manual (Page 8)

8
If you do not want the ringer to sound,
set
RINGER OFF/LO/HI to OFF . With the
ringer off, you can still make calls (and
answer calls if you hear another phone
on the same line ringing).
SETTING THE DISPLAY
LANGUAGE
The CID-927 is preset to show Caller ID
messages in English. Follow these
steps to change the language to French
or Spanish.
Note: If you do not finish a step within
20 seconds and the phone exits setup,
or if you make a mistake, start again at
Step 1.
1. Press STORE . PROGRAM MODE
appears.
2. Press REVIEW . SET LANGUAGE
then 1=EN 2=SP 3=FR appears.
3. Press:
• 1 to select English
• 2 to select Spanish
• 3 to select French
The CID-927 beeps once, then the cur-
rent time display returns.
SETTING THE DATE AND
TIME
Your phone company sends the date
and time with each incoming call if you
subscribe to Caller ID service. Or, follow
these steps to set the date and time.
Note: If you make a mistake, simply
start again at Step 1.
1. Press STORE . PROGRAM MODE
appears.
2. Press REVIEW . -:- -/- - with
the date cursor flashing and SET
DATE appear.
3. Enter the desired date using number
keys. SET TIME appears and the
hour cursor flashes.
4. Enter the desired time. =AM
#=PM appears.
5. Press to select AM or # to select
PM. The phone beeps and the set
time display returns.
ADJUSTING THE DISPLAY
CONTRAST
Repeatedly press CONTRAST on the
back of the phone to adjust the display
contrast. The CID-927 beeps once then
the current time display returns.
STORE
CONTRAST
43-927.fm Page 8 Thursday, June 24, 1999 9:36 AM