Radio Shack CENTRAL 5000 49-2570 - Manual (Page 27)

27
Using SECURITY LIGHT
Use the SECURITY LIGHT button on the
handheld remote control or the con-
sole to turn on/off a light module set to
the same House and Unit Code as you
selected when you set up the system.
Using BRIGHT/DIM
Use the BRIGHT/DIM button on the
handheld remote control to brighten or
dim lights connected to Plug ´n Power
lamp modules.
Turn on the module by pressing the re-
mote control
ON button that corre-
sponds to the module’s Unit Code.
Then press and hold
BRIGHT or DIM on
the remote control until the light reach-
es the desired brightness.
Note: You cannot brighten or dim
lamps connected to appliance mod-
ules.
RESETTING THE
CONSOLE
To remove all sensor transmitters from
memory, set the console’s
INSTALL/
RUN 1/RUN 2 switch to INSTALL . Then
press PANIC, ARM HOME , and ARM
AWAY at the same time.
Note: This does not clear the settings
that ORCA Monitoring Services pro-
grammed into your system during ini-
tialization.
ARM
AWAY
SECURITY
LIGHT
ON OFF
AUTOMATIC
MESSAGE
DIALLER
plug'n power
C O M P A T I B L E
DISARM
ON OFF
A
I
E M
O C
G K
•
•
•
•
•
•
•
• INSTANT DELAY
BRIGHT DIM
ENTRY
49-2570.fm Page 27 Wednesday, August 18, 1999 3:59 PM