Avoid use of abrasives or solvents, Do not – Roksan Audio FR - 5 User Manual
Page 3
Roksan Audio ltd
Caspian FR-5 Loudspeaker User Manual
CLASSIFICATION: General Use
Version: 1.07
All specifications are liable to change without notice. E&OE
Page 3 of 12
ENGLISH
Included in the packing of your Caspian FR-5 Loudspeakers you will find:
• One spike accessory pack and spirit level in one marked loudspeaker carton
• One information pack and warranty card
After unpacking please retain all packing materials. Correct packing is necessary for future transportation of your
Caspian FR-5 Loudspeakers.
M
M
A
A
I
I
N
N
T
T
E
E
N
N
A
A
N
N
C
C
E
E
To maintain the appearance of the FR-5 loudspeaker as new, occasionally wipe the cabinet surface with a lightly
dampened soft cloth or chamois leather. Quality wax based furniture polish may be used but you should
experiment with the least obvious surface such as the back vertical plane (where the terminal panel is) to avoid
any potential damage to the high quality finish.
Your Caspian FR-5 Loudspeakers are high quality audio devices, therefore care must always be taken to
transport, position and operate the units correctly.
DO NOT expose the loudspeakers to extreme climatic conditions such as excessive cold, heat, sunlight, rain
humidity or water etc…
DO NOT attempt to install the loudspeakers until you have read and understood all the necessary operational
parameters and installation instructions regarding your Caspian FR-5 Loudspeakers.
DO NOT make any connections between the amplifier and the loudspeakers while the amplifier is on. (Always
refer to the amplifier user manual)
Caspian FR-5 Loudspeakers contain no user serviceable parts. Do Not remove any drive units/panels or
attempt to service the loudspeakers yourself. Unauthorised servicing will void the warranty.
C A U T I O N S
C a s p i a n
FR-5 Loudspeaker
DO NOT
wipe or press on the tweeter dome or the woofer cone as
this may cause permanent damage to the drive units
1
Avoid use of abrasives or solvents
1