Ricoh R3111x Series - Manual (Page 3)

R3111x
3
SELECTION GUIDE
The package type, the detector threshold, the output type and the taping type for the ICs can be selected at
the users’ request. The selection can be made with designating the part number as shown below;
Product Name Package Quantity per Reel Pb Free Halogen Free
R3111Dxx1 ∗-TR-FE SON1612-6 4,000 pcs Yes Yes
R3111Qxx1 ∗-TR-FE SC-82AB 3,000 pcs Yes Yes
R3111Qxx2 ∗-TR-FE SC-88A 3,000 pcs Yes Yes
R3111Nxx2$-TR-FE SOT-23-3 3,000 pcs Yes Yes
R3111Nxx1$-TR-FE SOT-23-5 3,000 pcs Yes Yes
R3111Hxx1$-T1-FE SOT-89 1,000 pcs Yes Yes
R3111Exx1$-TZ-F TO-92 ( Discontinued ) 2,500 pcs Yes No
xx : The detector threshold can be designated in the range from 0.9V(09) to 6.0V(60) in 0.1V steps.
(For other voltages, please refer to MARK INFORMATIONS.)
∗ : Designation of Output Type
(A) Nch Open Drain (Output "L" at Detection)
(B) Nch Open Drain (Output "H" at Detection)
(C) CMOS (Output "L" at Detection)
$ : Designation of Output Type
(A) Nch Open Drain (Output "L" at Detection)
(C) CMOS (Output "L" at Detection)