Radio Shack XMODS 60-439 - Manual

XMODS ® Street Custom RC
Headlight and Taillight Kit
Light up your XMODS ® RC Car with operating headlights and taillights. The headlights brighten when
your vehicle moves forward, backward, or when you apply the brakes. The taillights brighten when you
apply the brakes. In other situations, the headlights and taillights remain dim. Before installing, turn
off your vehicle and controller, and detach the vehicle’s body.
1. Insert the PCB’s end opposite to the screw
hole into the PCB holder. Then, tighten the
PCB with one of the supplied screws.
2. Insert the lights on the end of the red and
black wire (taillights) into the holes at the
rear of the vehicle’s body, and insert the
lights on the end of the black and white wire
(headlights) into the holes at the front of the
vehicle’s body. For secure placement, use
adhesive tape to attach the wires to the car
body.
www.xmodsRC.com
60-439
09A08
INS-3352-US-08
Printed in China
©2008 RadioShack Corporation. All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
Limited Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-
owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES,
INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES
CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN,
RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO
ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING,
BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, EVEN IF
RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply
to you.
In the event of a product defect during the warranty period, take the product and the
RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option,
unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made, become the property of
RadioShack. New or reconditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after
the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation
or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a
RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
RadioShack Customer Relations; 300 RadioShack Circle, Fort Worth, TX 76102
12/99
3. Attach the light set connector to either of
the vehicle’s PCB mating connectors.
4. Reattach the vehicle’s body to the chassis.
Light Set Connector
Black and White Wire
PCB Holder
Red and Black Wire
PCB Mating Connector
Installation Difficulty: INTERMEDIATE
60-439
What’s Included
Headlights Taillights Screw (2) User’s Guide