Radio Shack MIDI Keyboard - Manual (Page 11)

10 Special Features
1. Press SONG , then repeatedly press
LEARNING until black dots appear next
to
21( .(<
on the left side of the display.
2. Select a tone from the SONGS list and
enter its two-digit number on the key-
pad.
Or, you can press – or + to move to the
next higher or lower numbered tune.
3. Press START/STOP . The keyboard plays
the first note of the tune you selected
and the note appears. Press the corre-
sponding key on the keyboard to con-
tinue learning. The next note you need
to press appears. The tune will continue
to play even if you press the wrong key.
4. To stop learning, press START/STOP
again or press LEARNING . If you
pressed LEARNING , a black dot appears
next to
:$,7,1*
and

a note appears.
Press the correct key to continue learn-
ing. The tune doesn’t play until you
press the correct key.
If you want to play the tune with accompani-
ment in the learning mode, repeatedly press
LEARNING until a black dot appears next to
0(/2'<2))
.
If you want to quit the learning mode, repeat-
edly press
LEARNING until the black dot ap-
pears next to
1250$/
.
USING THE METRONOME
To turn on the keyboard’s metronome, press
TONE or RHYTHM , then press METRO . The
metronome’s bar swings along with the tem-
po you selected, and the corresponding beat
appears. Press
METRO again to turn the met-
ronome off.
USING BEAT
When the metronome is on, repeatedly press
BEAT until you hear the desired beat to ad-
just it. 9 beats (00, 02 – 09) are available and
can be selected cyclically. The beat number
you selected appears.
ˆ
Special Features
RECORDING
You can record a sequence of notes up to 37
notes in length.
1. Press RECORD to start recording.
5(&25'
appears.
2. Play the notes you want to record.
3. Press PLAY to play the notes you
recorded.
3/$<
appears.
4. To turn off recording, press RHYTHM ,
TONE , or SONG .
Note: If the keyboard loses power,
recording is turned off and any recording
you made is erased.
USING ONE-TOUCH
SETTING
Your keyboard’s one-touch setting feature
lets you automatically play a preset tone to
match a selected auto-rhythm you changed.
1. Press RHYTHM .
2. Enter a two-digit auto-rhythm number.
3. Press O.T.S .
276
appears.