Selecting patches (sounds) – Roland Fantom G8 User Manual
Page 29
29
Preparations for Song Production
3.
Turn the VALUE dial or use [DEC] [INC] to choose “PRST 007: Rock Studio Set.” After
you’ve selected a studio set, press [F8 (Select)] to confirm your choice.
“PRST 007: Rock Studio Set”
is a studio set that has suitable sounds and effect settings
prepared beforehand to make a rock song.
1.
Select a piano sound for part 1.
2.
In the same way, select a bass sound (category “Bass”) for part 2.
3.
In the same way, select a rhythm set for part 10.
By default, a rhythm set will be selected for part 10. In the case of a rhythm set, there’s no
need to use the [F1] [F2] keys in the patch list to select a category.
Changes you make are temporary, and will be lost when you turn off the power, switch the
sound generator mode, or select a different studio set. If you want to keep the studio set you
edited, you must save the studio set as described in
“Saving the settings you’ve made”
Selecting patches (sounds)
Use the cursor buttons to
highlight part 1, then press
[F1 (Patch List)], ...
Then use [F1] [F2] to select the category “AC.Piano” and
turn the VALUE dial to select the desired piano patch.
When you’ve made your selection, press [F8 (Select)].
Fantom-G_q_e.book 29 ページ ２００８年２月４日 月曜日 午後２時２６分