RCA F19426 - Manual (Page 10)

Connections & Setup
8 Chapter 1
TV + VCR
1. Connect your TV to your VCR
A. Connect a coaxial cable to the ANTENNA jack on your TV and to the Output
Jack on your VCR (sometimes labeled OUT TO TV).
B. Connect the audio/video cables. Connect an audio cable (white) to the AUDIO
input jack on the back of the TV and to the left mono Audio Output Jack on the
VCR (sometimes labeled OUT R L).
C. Connect the video cable (yellow) to the VIDEO input jack on the back of the TV
and to the Video Output Jack on the VCR.
2. Connect cable or antenna to your VCR
Connect the coaxial cable from your cable outlet, cable box, or antenna to the Input
Jack on your VCR (sometimes labeled IN FROM ANTENNA or IN FROM ANT).
3. Connect the G-LINK cable to the TV
Connect the G-LINK cable to the G-LINK jack on the TV. Next step, place one of the
wands of the G-LINK cable to work with your VCR (instructions are on p. 13).
Go to page 13
TV
VCR IN FROM ANT
OUT TO TV
CH3
CH4
VCR
VIDEO
OUT
L R
AUDIO
TV (back panel)
ANTENNA VIDEO
AUDIO
INPUTS
G-LINK
From Cable
or Antenna
2
3
1A 1B
1C
15720240.01 Setup 4/9/02, 1:00 PM 8