Rangemaster R6012 - Manual (Page 9)

7
The Clock
Setting the 24-hour Clock
To set the time, simultaneously press and hold the clock ‘H’
and ‘M’ keys until the oven beeps and the central digital ‘dots’
start flashing (Fig.2-16). Use the ‘H’ and ‘M’ keys to set the
hours and minutes respectively.
After a few seconds, the oven will beep and the display will
stop flashing. The clock is now set.
The Timer
The timer functions are operated by the appropriate ‘H’ and
‘M’ keys. To zero a timer setting press and hold both keys
simultaneously until the display resets to ’00:00’.
Setting the Minute Counter
The oven timer can operate as a simple minute counter. To set
the minute timer:
1. Switch on the oven without selecting a function.
2. On the lower timer, set the ‘cook time’ (Fig.2-17).
Note that the ‘stop time’ timer activates showing the
current time while the timer is being set.
After a few seconds the timer will activate, as indicated by
the flashing [
ArtNo.030-0022 R6012 timer symbols
] symbol (Fig.2-18). The display will show the
remaining time until the alarm sounds.
Upon completion, the alarm will beep intermittently. Press
any key to stop the alarm.
Setting the Cooking Time
The oven timer can be set to cook for a fixed length of time
(cook time) at the end of which the oven will automatically
switch off. To set the cooking time:
1. Switch on the oven and select the required cooking
function.
2. On the lower timer, set the ‘cook time’.
Note that the ‘stop time’ timer activates showing the
current time while the timer is being set.
After a few seconds the timer will be set, as indicated by the
flashing [
ArtNo.030-0022 R6012 timer symbols
] symbol and the timer will start to count down.
Upon completion, the alarm will beep intermittently and the
oven will stop cooking. Press any key to stop the alarm.
Note: The ‘cook time’ and ‘stop time’ can be set in any order.
To Stop the Oven Cooking using the Timer
The oven timer can be set to stop cooking at a specified time
even if the cooking has already begun. To set the cooking
‘stop time’:
1. On the upper timer, set the ‘stop time’ (Fig.2-19).
Note that the ‘cook time’ timer activates while the timer
is being set.
After a few seconds the timer function will activate, as
indicated by the flashing [
ArtNo.030-0022 R6012 timer symbols
] symbol and the animated steam
[
ArtNo.030-0022 R6012 timer symbols
] symbol (Fig.2-20).
ArtNo.304-0003 - R6012 minute counter 2
ArtNo.304-0002 - R6012 minute counter
Fig.2-17
Fig.2-18
ArtNo.304-0004 - R6012 setting the stop time
Fig.2-19
ArtNo.304-0005 - R6012 setting the stop time 2
Fig.2-20