Ricoh Aficio CL5000 User Manual

Page 2

Advertising

❖ Do not pull the paper out until it has been stapled. If you do, the paper may misfeed.

If a paper misfeed occurs, check the error message on the printer's display
panel, and then remove the paper.

Reference

For information about dealing with paper misfeeds, see Maintenance
Guide 2 that comes with the printer.

Note

❒ The reprinting operation after dealing with an error depends on the paper

misfeed location.
• When "Remove Misfeed R: Finisher " appears, printing restarts from the

first page of the document being printed or the page of the document
being printed when the misfeed occurred.

• When "Remove Misfeed A:Internal Path" appears, printing restarts

from the page of the document being printed when the misfeed oc-
curred.

❒ Even if the paper misfeed occurred in the Internal Path, the error message

may not disappear unless the covers of the Finisher are opened and then
closed.

❖ Staple printing is cancelled in the following cases:

• You set more sheets than can be stapled

The maximum number of sheets that can be stapled is 30.

• You select a paper size that cannot be stapled

The paper sizes that can be stapled are A3 (11.69

×16.54)L, B4

(10.12

×14.33)L, A4/letterK, A4/letterL, B5 (10.12×7.17)K, 11×17L, Le-

gal

L, ExecutiveK, FoolscapL, 8KL, and 16KK.

• You select a paper type that cannot be stapled

The paper types that can be stapled are "Plain Paper" and "Recycled Pa-
per". ("Labels", "Thick Paper", and "Transparency" paper types cannot be
stapled.)

• You set staple positions other than the specified staple positions
• The binding positions and the staple positions are inconsistent when per-

forming duplex printing

• A different paper size is set in the middle of a job so that a mixture of paper

sizes is output

• Output is not directed to the Finisher Tray
• The staples have run out

Note

❒ If staple printing is cancelled, "Staple Cancelled" appears on the printer's

panel display.

G071-7880

UE USA

EE GB

Advertising