Renesas PCA7438F-80A - Manual (Page 14)

( 12 / 16 )
4.5 Inserting an MCU into the Programming Adapter
As shown in Figure 4.5, insert the MCU into the IC socket, with the pin No. 1 of the MCU matched
to the pin No. 1 of the IC socket on the PCA7438F-80A/PCA7438L-80A.
Be careful when inserting the MCU because incorrect insertion can cause fatal
damage to the MCU.
Top view
Figure 4.5 Inserting an MCU
4.6 Precautions When Opening and Closing the IC Socket
When opening and closing the IC socket, hold the adapter horizontally as shown in Figure 4.6.
Otherwise the inside of the IC socket may become damaged and cause an electrical insulation failure.
Figure 4.6 Holding the adapter in a horizontal position
4.7 Precautions When Handling the Adapter
Do not touch the connector in the IC socket and the pins on the PROM programmer connector,
otherwise it cause an electrical insulation failure because of dirt.
When not using, attach the connector pins of this product to the conductive sponge as it was shipped
from the factory.
Same for the PCA7438L-80A