RIDGID R83001 - Manual (Page 15)

15
Fig. 12
OPERATION
ADJUSTABLE TORQUE CLUTCH
This drill is equipped with an adjustable torque clutch for
driving different types of screws into different materials. The
proper setting depends on the type of material and the size
of screw you are using.
TO ADJUST TORQUE
n Identify the twenty four torque indicator settings located
on the front of the drill. See Figure 11.
n Rotate adjusting ring to the desired setting.
• 1 - 4 For driving small screws.
• 5 -8 For driving screws into soft material.
• 9 -12 For driving screws into soft and hard
materials.
• 13 -16 For driving screws in hard wood.
• 17 - 20 For driving large screws.
• 21 -
For heavy drilling.
BIT STORAGE
See Figure 12.
When not in use, the bit provided with this drill can be placed
in the storage area located on the rear of the drill.
WARNING:
Always wear safety goggles or safety glasses with
side shields when operating tools. Failure to do so
could result in objects being thrown into your eyes,
resulting in possible serious injury.
Fig. 11
TO DECREASE
TORQUE
TO INCREASE
TORQUE
ADJUSTING
RING
BIT STORAGE AREA
SCREWDRIVER BIT