Radio Shack ET-2105 - Manual (Page 12)

11
Note: If your phone system requires that you dial an access
code (9, for example) before you dial an outside number, do
not press the access code either.
If the dial tone stops, you have touch-tone service. If the dial
tone continues, you have pulse service.
If you have tone service, leave TONE/PULSE set to TONE . If
you have pulse service, set TONE/PULSE to PULSE .
4. To hang up, place the keypad on the base or press TALK .
Using the Earphone
1. Insert the earphone’s plug into the jack on the side of the
keypad.
2. Place the mono-earphone in either ear.
3. Move the clip along the earphone cord and clip it to your
clothing.
When you are not using the earphone, follow these steps:
1. Open the earphone compartment cover by pulling its tabs on
both sides.
2. Place the earphone in the compartment.
3. Close the compartment cover.
Using the Belt Clip
You can use the belt clip to hang the keypad on your belt or waist-
band for hands-free carrying. To attach the belt clip, snap the up-