Radio Shack 63-995 User Manual
Page 2
63-995
05A02
Printed in China
RadioShack Corporation
Fort Worth, Texas 76102
5'66+0)"6*'"'"#0&"
6+/'
1. Open the cover.
±ý
2. Hold down
TIME SET
Ð
until the clock
sounds a long beep and the hour digits
flash.
3. Repeatedly press (or hold down)
8
or
9
to set the hour.
±ý
4. Press
TIME SET
Ð
to store the hour. The
minute digits flash.
5. Repeat Steps 3 and 4 to set the minute,
year, month, and date.
6. Press
TIME SET
Ð
to finish setting the
clock. The clock beeps once then the
time reappears.
±
5'66+0)"6*'"#.#4/"
6+/'
You can set the clock to sound an alarm to
remind you of a daily event (such as a
meeting).
±
1. Hold down
ALARM SET
Ì
until the clock
beeps.
'(0&&
'(0&&
'(0&&
'(0&&
or the preset alarm time
appears. The hour digits flash.
2. Repeatedly press (or hold down)
8
or
9
/
12/24
to set the alarm hour.
3. Press
ALARM SET
Ì
. The minute digits
flash.
4. Repeatedly press (or hold down)
8
or
9
/
12/24
to set the alarm minute.
5. Press
ALARM SET
Ì
to store the alarm
time. The clock beeps once, the alarm
turns on, and
Ì
appears.
At the preset alarm time, the alarm sounds
for 1 minute then automatically turns off. To
silence the alarm sooner, press any key
(except
SNOOZE & LIGHT
and
8
).
±
If you do not want the alarm to sound again
the next day, press
ALARM ON/OFF
to turn off
the alarm.
Ì
disappears.
±
75+0)"5011<'
To temporarily silence the alarm for 5
minutes, press
SNOOZE & LIGHT
or
8
to
turn on the snooze function.
Î
appears.
After 5 minutes, the alarm sounds for 1
minute. You can press any key to temporarily
silence the alarm and have the alarm sound
four times every five minutes.
To turn off the snooze cycle, press
ALARM
ON/OFF
Í
twice.
To cancel the snooze function before it
begins, press
ALARM ON/OFF
Í
once.
Î
and
Ì
disappear.
%*#0)+0)"6*'"&')4''"
(14/#6
Repeatedly press
C/F
Ï
to switch the
temperature from Fahrenheit (
°
F) to Celsius
(
°
C) format on the display.
The thermometer automatically measures the
temperature and updates its display every
minute.
4'5'66+0)"6*'"%.1%-
If the clock displays segmented digits, does
not work properly, or locks up, you can reset
it by using a pointed object, such as a
straightened paper clip, to press
RESET
on
the back of the clock. The clock beeps once.
Resetting the clock erases all stored
information.
%#4'
Keep the clock dry; if it gets wet, wipe it dry
immediately. Use and store the clock only in
normal temperature environments. Handle
the clock carefully; do not drop it. Keep the
clock away from dust and dirt, and wipe it
with a damp cloth occasionally to keep it
looking new.
5'48+%'"#0&"4'2#+4
If your clock is not performing as it should,
take it to your local RadioShack store for
assistance. Modifying or tampering with the
clock’s internal components can cause a
malfunction and might invalidate its warranty.
52'%+(+%#6+105
Power ...................................... Two AAA Batteries
Clock Accuracy .............................
±
0.67 Sec./Day
Temperature Accuracy .......................
±
2
°
F (
±
1
°
C)
Operating Temperature .................... 16
°
F to 128
°
F
(–9
°
C to 54
°
C)
Battery Life ......................................... 5000 Hours
Dimensions (HWD) ....... 3
1
/
4
Ч
3
3
/
16
Ч
15
/
16
Inches
(83
Ч
81
Ч
24 mm)
Weight (Without Batteries) .......... 31.75 oz (900 g)
Specifications are typical; individual units might
vary. Specifications are subject to change and
improvement without notice.
±
"016'"
±
"
Setting the Date and Time
•
All the setting controls are on the back of the
clock.
•
While setting the time, if you do not press a
key for about 30 seconds, the clock returns
to the current time/temperature display.
•
When you set the date, the clock
automatically sets the day of the week.
•
To switch between the 12– and 24– hour
time formats, press
9
/
12/24. In the 12–
hour format,
FFFF
appears for a PM hour.
•
If you press ALARM SET
Ì
, C/F, or
ALARM ON/OFF
Í
during the time setting,
the clock automatically returns to the
previous setting.
Setting the Alarm
•
While setting the alarm time, if you do not
press a key for about 30 seconds, the clock
returns to the current time display.
•
Pressing SNOOZE & LIGHT or
8
during
the alarm time activates the snooze function.
•
When you close the cover to store the clock,
the setting controls are exposed. To avoid
turning off the preset alarm time by
inadvertently touching ALARM ON/OFF
Í
,
press ALARM SET
Ì
until the alarm icon
appears.