Radio Shack 43-3880 - Manual (Page 53)

T
he I
n
tegrat
ed
A
n
swering Device
53
S
ETTING UP
Y
OUR
A NSWERING S YSTEM
Setting your outgoing message
(Greeting)
When you receive a call, the answering
system automatically plays either the pre-
recorded message or your own personal
message (greeting).
Pre-recorded message
The following message is pre-recorded:
“ Hello, no one is available to take your call.
Please leave a message after the tone. ”
Recording a personal outgoing
message (Greeting)
You can record a greeting up to 30 seconds
long (must be more than two seconds long).
1. When the phone is in the standby
mode, press and hold OGM .
2. Start your recording after the
announcement “Record greeting”. Ô
The message counter displays “ 30 ”,
then begins to count down.
3. When you have finished recording your
greeting, press OGM , SET , or
XPLAY/ STOP .
You will hear a confirmation tone and
your recorded greeting plays back for
you.
Choosing between the two
outgoing messages
When the phone is in standby mode, press
OGM . Press OGM again when the outgoing
message is played. Each time OGM is
pressed, the outgoing message is switched
between the pre-recorded and the personal
outgoing message.
Ô
NOTES
Ô
• If you make an outside
call, or a call is received
on the base during the
operation, the operation
is canceled.
• Position yourself as near
to the base as possible
and speak clearly when
recording your outgoing
message.