Roland KR117/115 - Manual (Page 40)

40
Chapter 1 Performance
Chapter 1
■ Selecting the Part for the Effect
1.
Press the [Surround/Reverb] button and watch the indicator light up.
2.
Touch <Surround> to display the Surround screen.
3.
Press the [Option] button.
The following screen appears.
fig.d-adv3d.eps_60
4.
Touch the icon to switch the effect on or off for each individual part.
When you press the [Exit] button, the Advanced 3D effect is activated, and you
return to the previous screen.
Cancelling the Effect
5.
Touch the Type icon <Advanced 3D> and watch the light go out.
The Advanced 3D effect is eliminated, and the effect is no longer applied to any of
the parts.
OFF ON
The Advanced 3D effect is not
applied, even when you touch
<ON>, if all parts are turned
off.
KR117_r_e.book 40 ページ ２００５年１１月８日 火曜日 午後４時２０分