Renesas Emulation Pod M37760T-RPD-E - Manual (Page 26)

( 24 / 64 )
Table 3.1 Switch settings of the M37760T-RPD-E
Switch setting Description
SW1
P31 side
When using P31/XCIN pin as a
port, set to P31 side. XCIN side
When using P31/XCIN pin as a
sub-clock, set to XCIN side.
JP23
JP24
JP25
JP11-JP18
JP26-JP41
XCIN
(Factory-setting)
USENSE
NC
(Factory-setting)
USENSE side
Be sure to fix to this side. NC side
Do not use this side.
XOUT
NC
(Factory-setting)
XOUT side
Connects the XOUT pin to the
target system. NC side
Does not connect the XOUT pin
to the target system.
XOUT pin is open.
P30/XCOUT
NC
(Factory-setting)
P30/XCOUT side
Connects the XCOUT/P30 pin
to the target system. NC side
Does not connect the XCOUT/
P30 pin to the target system.
XCOUT/P30 pin is open.
P31
These switches are related to the peripheral circuit of the MCU such as OSD.
For the specifications of these switches, see "5.3 Connection Diagram" (page 46).