Radio Shack TAD-716 - Manual (Page 16)

16
POWER FAILURE PROTECTION
If an AC power failure occurs, or the power plug comes
out of the wall, the TAD-716 shuts down until power is re-
stored. When power is restored, any messages recorded
before the power failure will be saved and the message
indicator flashes. If the TAD-716 is still not operating
properly when the power is restored, you must reset it
(see “Resetting the TAD-716”).
RESETTING THE TAD-716
1. Unplug the TAD-716 from the AC outlet and flip the
microcassette to the other side.
2. Plug the machine back into the AC outlet. The TAD-
716 begins searching the tape messages (this might
take 2–3 minutes).
If the message indicator flashes, press PLAY to play
all the messages. Then the message indicator lights
steadily.
3. Record a new outgoing message.