Rosewill RNX-GX4 User Manual
Page 7
Wireless Router
RNX-GX4 Quick Installation Guide
6
2.
PPPoE user (ADSL): PPPoE method is mostly for DSL internet users. When
selecting this method, you will need to enter your PPPoE Username and PPPoE
Password provided by your ISP provider, then click “Save Settings”.
PPPoE Username and Password is provided by your ISP provider, they are not
the same as the login name and password when entering to the wireless router’s
web management page. When entering the Username and Password, please make
sure that the characters are in the same format as your ISP provided.
3.
Static User: When using Static IP to connect to the internet, you will need to enter
“WAN IP address”, “Subnet Mask”, “Default Gateway”, “Primary DNS”, and even
“Secondary DNS”. All these information should be provided by your ISP provider.
When finishing entering, click “Save Settings”.
5. When finish setting the wired connecting method, we can now set wireless for your router.
Please select “Primary AP Setup” on the left hand corner under “Wireless Management”.
Change the SSID to your desired name, then Click Save Settings.
Next Click “Security” to select your preferred “Security Mode” and type in your Wireless