RightWay SPOTTER RW-500 - Manual (Page 42)

42
ADJUSTING YOUR SAFETY VIEW
Tap Menu > Settings > Next> Driver Safety. From here you can alter the settings of
the Safety View in the following ways:

Display Map Near Turns: Decide whether to show a 2D/3D zoomed
map on the approach to each turn or always show the Driver Safety
screen. Check the box for Yes to display the map or No not to.

When the Turn is Within: If you selected Yes above, choose the
distance before the turn you would like the map to be displayed. The
distance can be set between 0.3 miles and 1 mile.

Map Type: If Display Map Near Turns is set to Yes, select whether to
use a 2D or 3D map when approaching turns.

Tap OK to save your new settings and exit. Tap Cancel to discard your
changes.
TRACK PLAYBACK
You can play back a previously completed trip.

Tap Menu > Settings> Next > Track Playback.

Select the trip from the list.

Tap Play to start playback.

Adjust the playback speed using the up and down arrows next to the
Track Playback Speed field. The available speeds are between 1.O X
and As Fast As Possible.

To stop playback, tap Stop.

To exit, tap Cancel.