Raymarine Marine GPS System - Manual (Page 80)

RayTech Navigator User’s Guide
4-16
To put a man overboard waypoint at the vessel’s current position:
1. As shown in Figure 4-18, select Place Waypoint at Cursor
from the Waypoint menu, click MOB on the toolbar, or
click
More/More/Man Overboard on the function bar.
The man overboard marker is placed automatically at the
vessel’s current position, Navigator calculates the most direct
route back to the marker, and automatically makes that route
the active route.
Figure 4-18. Placing A Man Overboard Marker